Car Body Dent Puller Removal Panel Ding Repair Suction Handle Lifter

The small car dent remover tool is designed to get into tight spaces and to work with smaller dents; Use the dent puller kit car dent repair device to lift materials up to 32 lbs.

Put down the suction cup handle, and Put suction cup on the dent surface closely, then flip the suction cup handle up, make sure suction cup firmly stick on the dent surface; Pull the suction cup up use the handle on the suction cup, the dent surface will be pulled up with the suction cup.

The car dent puller not only can be used as a tool for repairing car dents, but also to disassemble screen or used as a phone stand to watch videos; can be used on glass, mirror, or any smooth sheet objects.

If the dent is minor and deep, it is difficult to remove. Must be used on a clean, smooth, flat, non-porous, and dry surface. 

The suction cups handle body constructed with aluminum alloy, which has higher hardness and is not easy to break and deform. The bottom of suction pads made of high strength natural rubber. The soft rubber pad is gentle on surfaces and won’t scratch the paint.

Notes :

1. When dealing with car dent, only for the flat surface, not for the curved surface.

2. Please make sure that the dent are in the flat surface and should be larger than the bottom suction cup diameter.

3. Always try to make sure there is good suction before lifting.

5. Must be used on clean, smooth, flat, non-porous, dry surfaces.

6. Please store the suction cup in clean, dry condition.